Rakocontrols Knowledge Base

Compatible Hardware

Published July 17th, 2025 by Jordan Huby

Mains Wireless Devices RMT-500 RMT-1200 RMT-PILL RML-500 RML-1200 RMS-800 RDA-800 RLED Devices RLED45CC1 RLED20+CC4 RLED75CV1 RLED150CV1 RLED30CV4+ Curtain/Blind Controllers RACUB RACUB2L RACUB24DC Presence Sensors RK-PIR HUB RK-HUB Keypads RNC RK-EOS-6 RK-MOD

RMT-500 Instruction Manual

Published July 18th, 2025 by Jordan Huby

Instruction Manual RMT-500 500W Trailing Edge Wireless Dimmer 1.0 What is the RMT-500? The RMT-500 is a wireless trailing edge dimming module designed for mains dimmable LEDs, tungsten and incandescent lamps. The RMT-500 dimmer modules are not suitable for inductive loads such as wire-

RML-1200 Instruction Manual

Published July 21st, 2025 by Jordan Huby

Instruction Manual RML-1200 1200W Leading Edge Wireless Dimmer 2025 Version 2.0.1 Contents 1.0 What is the RML-1200? 3 2.0 Loadings 3 3.0 Installation of the RML-1200 3 4.0 Initial Checks 5 5.0 Programming the RML-1200 5 6.0 Appendix 1: LED Diagnostics 6 1.0 What is the RML-1200? RML-1

RMT-1200 Instruction Manual

Published July 21st, 2025 by Jordan Huby

Instruction Manual RMT-1200 1200W Trailing Edge Wireless Dimmer 2025 Version 2.0.1 Contents 1.0 What is the RMT-1200? 3 2.0 Loadings 3 3.0 Installation of the RMT-1200 3 4.0 Initial Checks 5 5.0 Programming the RMT-1200 5 6.0 Appendix 1: LED Diagnostics 6 1.0 What is the RMT-1200?

RMT-PILL Instruction Manual

Published July 21st, 2025 by Jordan Huby

Instruction Manual RMT-PILL 250W Trailing Edge Wireless Dimmer 2025 Version 2.0.2 Contents 1.0 What is the RMT-PILL? 2 2.0 Loadings 3 3.0 Installation of the RMT-PILL 3 4.0 Auxiliary Input 4 5.0 Initial Checks 4 6.0 Programming the RMT-PILL 4 7.0 Appendix 1: LED Diagnostics 6

RMS-800 Instruction Manual

Published July 21st, 2025 by Jordan Huby

Instruction Manual RMS-800 800VA Wireless Switching Unit 2025 Version 2.0.1 Contents 1.0 What is the RMS-800? 2 2.0 Loadings 3 3.0 Installation 3 4.0 Initial Checks 4 5.0 Programming the RMS-800 4 6.0 Appendix 1: LED Diagnostics 5 1.0 What is the RMS-800? The RMS-800 is

What is OS4?

Published July 17th, 2025 by Jordan Huby

Rako OS4 is a web-based programming tool used for setting up a Rako Wireless System. Features Add or Remove Control Groups Add or Remove Rooms Assign Wireless Modules Advanced programming features (Macros, Mappings, etc.) Scene Setting Timed or Dawn/Dusk Events for scheduled control

RDA-800 Instruction Manuals

Published July 21st, 2025 by Jordan Huby

Instruction Manual RDA-800 0-10V/DSI/DLI Dimmer 2025 Version 2.0.2 Contents 1.0 What is the RDA-800? 3 2.0 Loadings 3 3.0 Installation 3 4.0 Initial checks 5 5.0 Programming the RDA-800 5 6.0 Appendix 1: LED Diagnostics 6 1.0 What is the RDA-800? The RDA-8

RML-500 Instruction Manual

Published July 18th, 2025 by Jordan Huby

Instruction Manual RML-500 500W Leading Edge Wireless Dimmer 1.0 What is the RML-500? The RML-500 is a wireless, leading-edge dimmer module suitable for use with mains voltage tungsten lighting and low voltage tungsten with leading-edge dimmable transformers. RML-500 modules are not generally recommended for use with LEDs. RML-500 modules can be

Creating a Room

Published July 17th, 2025 by Jordan Huby

Navigate to ‘Organisation’ Select ‘Add Room’ Enter the Room name Select ‘Save’ The new Room will appear in the list on the left-hand side Your browser does not support HTML5 video.

Accessing OS4

Published July 17th, 2025 by Jordan Huby

The following sections assume that the RK-HUB has been configured, if this has not yet been completed, see below: RK-HUB Instruction Manual Opening OS4 in the Browser OS4 is accessed via a web browser; the default is rakohub.local ( hub_name .local). The HUB name can be found in the diagnostic section of the Rako App. Your browser does not support

Requirements

Published July 17th, 2025 by Jordan Huby

Rako Hardware and Firmware Requirements RK-HUB firmware version of 3.7.6 or later Device Hardware and Firmware Requirements OS4 requires an up-to-date version of Google Chrome to use the HUB interface. Rako System Requirements OS4 is intended for setting up and configuring Rako Wireless Systems only.

Navigating OS4

Published July 17th, 2025 by Jordan Huby

Home The Home page of OS4 provides essential information about the system including the HUB version, co-processor version, date and time. Cloud The HUB can be linked to MyRako for integration with third-party applications such as HomeKit, Google Home and Alexa. Before such integrations are made, the HUB must be linked via the Cloud section of OS4.